| All rights reserved. Dirty South Pole, Co. LLC. |
YOUR POLE WILL COME COMPLETELY ASSEMBLED FOR YOUR
CONVENIENCE.
YOUR POLE HAS TWO FLANGES
YOU HAVE A TOTAL OF 8 SCREWS
YOU WILL NEED TO LOCATE A JOIST IN THE CEILING TO SECURE THE
FOUR SCREWS PROVIDED , THROUGH THE FLANGE INTO THE JOIST
ONCE YOUR POLE HAS BEEN SCREWED IN TO CEILING, A LEVEL
MAYBE REQUIRED TO MAKE SURE THAT THE POLE IS PLUMB BEFORE
SECURING THE FLOOR FLANGE WITH THE FOUR REMAINING SCREWS
PROVIDED.
IF YOU DO NOT HAVE A LEVEL MAKE SURE THAT THIS IS WHERE YOU
WANT YOUR POLE TO BE PLACED, SINCE YOU WILL BE SCREWING
INTO THE FLOOR.
YOUR REMOVABLE/PORTABLE POLE COMES COMPLETELY
ASSEMBLED FOR YOU.
ONLY THING THAT IS REQUIRED IS FOR YOU TO FIND A JOIST IN
CEILING AND A LEVEL FLOOR WHERE YOU WANT YOUR POLE.
WHEN YOUR POLE ARRIVES, REMOVE IT FROM BOX
LOCATE THE DESIRED LOCATION FOR INSTALLATION
WITH END OF POLE THAT LOOKS LIKE PICTURE ( 1 A) TIGHTEN THIS
END WITH A WRENCH ON BOLT THE LIKE SHOWN IN PICTURE ( 1B) TO
THE CEILING. ( Must be on a Ceiling Joist )
AND YOUR DONE! IT IS THAT SIMPLE!
IF USING ON CARPETED FLOORING, IT WOULD ONLY MAKE SENSE
THAT YOU WOULD HAVE TO RE TIGHTEN YOUR ADJUSTER AFTER
EACH USE., THINK OF IT THIS WAY, IT IS CONSIDERED A PIECE OF
FURNITURE, LIKE YOUR COUCH.
IF YOUR COUCH IS SITTING ON CARPET, AND YOU MOVE YOUR
COUCH, THERE ARE GOING TO BE INDENTIONS IN THE CARPET FROM
THE PRESSURE OF SOMEONE SITTING ON IT., SAME WAY WITH YOUR
POLE. MEANING, YOU WILL BE MAKING AN INDENTION INTO THE
CARPET BECAUSE IT IS SETTLING INTO THE CARPET.
THEREFORE, YOU WILL HAVE TO RE TIGHTEN YOUR CEILING
ADJUSTER a Few times after first initial set up. This will ensure that your
dance pole has settled into the carpet just like a couch as mentioned
above.
ASSEMBLED FOR YOU.
ONLY THING THAT IS REQUIRED IS FOR YOU TO FIND A JOIST IN
CEILING AND A LEVEL FLOOR WHERE YOU WANT YOUR POLE.
WHEN YOUR POLE ARRIVES, REMOVE IT FROM BOX
LOCATE THE DESIRED LOCATION FOR INSTALLATION
WITH END OF POLE THAT LOOKS LIKE PICTURE ( 1 A) TIGHTEN THIS
END WITH A WRENCH ON BOLT THE LIKE SHOWN IN PICTURE ( 1B) TO
THE CEILING. ( Must be on a Ceiling Joist )
AND YOUR DONE! IT IS THAT SIMPLE!
IF USING ON CARPETED FLOORING, IT WOULD ONLY MAKE SENSE
THAT YOU WOULD HAVE TO RE TIGHTEN YOUR ADJUSTER AFTER
EACH USE., THINK OF IT THIS WAY, IT IS CONSIDERED A PIECE OF
FURNITURE, LIKE YOUR COUCH.
IF YOUR COUCH IS SITTING ON CARPET, AND YOU MOVE YOUR
COUCH, THERE ARE GOING TO BE INDENTIONS IN THE CARPET FROM
THE PRESSURE OF SOMEONE SITTING ON IT., SAME WAY WITH YOUR
POLE. MEANING, YOU WILL BE MAKING AN INDENTION INTO THE
CARPET BECAUSE IT IS SETTLING INTO THE CARPET.
THEREFORE, YOU WILL HAVE TO RE TIGHTEN YOUR CEILING
ADJUSTER a Few times after first initial set up. This will ensure that your
dance pole has settled into the carpet just like a couch as mentioned
above.
STATIONARY INSTALLATION
Dance Pole Installation Instructions
Dance Pole Installation Instructions
REMOVABLE/PORTABLE
Dance Pole Installation Instructions
Dance Pole Installation Instructions
INSTALLATION INSTRUCTIONS
(1 a)
(1 b)
 |
 |
 |
If you have purchased a Dance Pole that has a Spinning/Static Option. Simply
remove the Pin on the Bottom of the Flange to make your Dance Pole Spin.
To make your dance Pole Stationary/Static simply reinsert the pin back into
the dance pole.
remove the Pin on the Bottom of the Flange to make your Dance Pole Spin.
To make your dance Pole Stationary/Static simply reinsert the pin back into
the dance pole.
Spinning Option:
You will receive 2 packages for your Main Stage Pole combo.
One package will contain your dance pole if you purchased that option.
Second package will be your Stage Combo.
Please be careful when you open your Stage Combo and make sure to open
the end that states " This End Up"
Once you have opened your Stage, You will need to unwrap from protected
wrapping, and carefully open your stage so that you may view the inside of
you Pole Stage Combo.
You will then need to unwrap your light kit that is included and make sure
that you have access to the cord so that you will be able to plug into a
standard household outlet.
Once you have your Dance Stage combo open, you will then simply place
your Dance pole into the top flange on top of the stage. Make sure that you
push the dance pole completely into the flange whole so that it goes down
into the stage.
You will have 2 screws, This is the only thing that you will have to screw
together on your stage. Using the 2 Screws simply screw them into the top
flange when your stage is out for use then simply remove the 2 screws in
order to fold your stage in half for storage.
One package will contain your dance pole if you purchased that option.
Second package will be your Stage Combo.
Please be careful when you open your Stage Combo and make sure to open
the end that states " This End Up"
Once you have opened your Stage, You will need to unwrap from protected
wrapping, and carefully open your stage so that you may view the inside of
you Pole Stage Combo.
You will then need to unwrap your light kit that is included and make sure
that you have access to the cord so that you will be able to plug into a
standard household outlet.
Once you have your Dance Stage combo open, you will then simply place
your Dance pole into the top flange on top of the stage. Make sure that you
push the dance pole completely into the flange whole so that it goes down
into the stage.
You will have 2 screws, This is the only thing that you will have to screw
together on your stage. Using the 2 Screws simply screw them into the top
flange when your stage is out for use then simply remove the 2 screws in
order to fold your stage in half for storage.
Stage information for installation: